ESI - Money Processing Equipment, Service and Supplies
In this chapter you will find information on: Intel Pentium Hz or above. Required at installation only. Real color card with 4M of display memory or above. Microsoft Access 97 and Access Product types supported by YDC. YDC system is a terminal control system that can work only when connected to the central application system Central , as illustrated in F Terminal communication with the Central.
YDC carries out transaction processing, maintenance operation supervisor , and ATM status monitoring. Complete transactions with the cardholder. Provide maintenance menu for the ATM operators to perform daily administration, like replenishing cash, print paper, and print ribbon, viewing the balance and configuring the local parameters.
Monitor the status of the ATM and reports exceptions both locally and remotely. Apart from the above basic functions, you can configure the application parameters to customize the transaction status, screen display, and the card types that will be accepted. YDC supports the following two application protocols: The YDC terminal can have access to networks that use the following protocols: All the maintenance operations are performed on the maintenance terminal diagnostic unit.
These operations constitute a multi-level menu structure. At present, the maintenance terminal has four main menus, with each having its own submenus. The structure is shown below: There is one sequence number in the front of each menu. By pressing one such number, you will enter the corresponding submenu, or the function of the corresponding menu will be performed.
The instruction for operation is as below: For all the operations above, if they are listed in the menu, you only need to press the corresponding numeric key. If any card is found to be in the Card Reader during the process of initialization, the Card Reader will retain it and record the retaining accordingly. After this, press any key to return to the system test submenu. The system will first initialize the receipt printer, and then print a few lines of data, before it displays the corresponding status result.
If it is found to be abnormal, the system will also display the data returned by the printer and the error code for query. The system will initialize the receipt printer, and then display the status result. If it is found to be abnormal, the system will display the data returned by the receipt printer and the error code for query. The system initializes the dispenser, and then checks the status of the note cassette.
After this, it will display the corresponding status result. If abnormal, it will also display the data returned by the dispenser and the error code for query. The system will immediately read the current status of the shutter and display the test result.
After this, press any key to return to other test submenu. The system will display the balance of the note cassette. The system will display a list of the note cassettes. You can check the balance of one note cassette by pressing the corresponding numeric key. Please note that it is the number of bank notes left in each note cassette in the database. Similar to the case to query the note cassette balance, the system will first display the note cassette list.
You can press the corresponding key to set total number of notes for the corresponding note cassette. The system will display whether setup succeeds or fails according to the actual condition. This operation opens the note cassette. Since the note cassette is locked when the ATM is powered on, you can draw out the note cassette only by this command. The system will prompt to input the files date, and then insert the floppy to copy.
To return to other operation submenu, press 0. If you press 1, the system will terminate all the processes in progress, and reboot Windows NT. Similarly, the system will prompt accordingly when the ATM is to be shut down.
At this time, you can cut off the power to shut down the machine. Privileged maintenance Default Password: The system will prompt the user first to input the current privilege password. The user can change the privilege password, only when the first input is correct. The password should be no more than 6 digits. The system will then prompt you to input the new password. The password cannot be changed unless the passwords inputted in two separate times are consistent.
After the password is successfully changed, press any key to return to the privilege maintenance submenu. Remember the 16 digits should be in capital. Take out the floppy. It is another way to input the master key. The operator could use the keyboard numeric key and function key to complete this operation.
It is another way to input the comm key. You can query the meaning of each specific error code, possible cause, and handling counter-measure. The error code is defined from 1, so the error code less than or equal to 0 is meaningless. This command allows switching to the foreground for maintenance. The menu display and operation of the foreground are the same as that of the background. Overview In this chapter you will find information on: Intel Pentium Hz or above Memory: Required at installation only Sound card: Enhanced color bit Resolution: Posted by ATM Operation at 9: Maintenance Operations How to troubleshoot error code for card reade